Make sure that EEE is disabled on all ports used for real-time Dante traffic. If you use managed switches, ensure that they allow EEE to be disabled.This may cause EEE to be enabled in Dante networks when it is not appropriate, resulting in poor synchronization performance and occasional dropouts. Please do not use the EEE function (*) of network switches in a Dante network.Īlthough power management should be negotiated automatically in switches that support EEE, some switches do not perform the negotiation properly.
Dante virtual soundcard cl3 update#
Prior to V3.0, the CL and QL Series used different files when updating, but both files used the same name * "C-MD1.BIN." For this reason, an error may occur during update when the incorrect "C-MD1.BIN" file is used or left in the root directory. BIN if any exists in the root directory of the USB memory. Before copying files, delete all files with extension.This method allows you to update both the Dante firmware and the "CL_SUBP_V451.BIN" and "MCLP4_51.PGM" files together at the same time. Follow the instructions on the update guide. If updating from CL V1.61 or older, or if the message "NAME SUB CPU is old" appears after updating to V4.51, copy "CL-MD101.BIN" file in CL*_firm451/NAME SUB (* is the model number) to the root directory of the USB memory.This method allows you to update both the firmware and the "CL_SUBP_V451.BIN" and "MCLP4_51.PGM" files together at the same time. You can now update the Dante firmware for CL also by using the USB memory. If you update the firmware from V4.10 or older, you also need to update the Dante firmware.Copy files "CL_SUBP_V451.BIN" and "MCLP4_51.PGM" to the root directory of the USB memory.Use the "cl*_firm451.zip "（* is the model number）when updating.Please read the following instructions before updating. Use this release notes to update CL/QL to V4.51.
0 kommentar(er)
